R&D Laboratory

Automatic Spring Tester

rnd07

CAPACITY (N) 50N / 5N
2STEP AUTO SWITCH-OVER
FOR LOAD CAPACITY
5kgf / 0.5kgf
MIN LOAD DIV. (N) 0.01N / 0.001N
MIN LOAD DIV. (gf) 1gf / 0.1gf
TEST SPEED 1~600mm / min
MAX TEST LENGTH (mm) 200,00mm
MIN LENGTHDIV (mm) 0.01mm
STANDARD ANVIL DIAM (mm) ø60
DIMENSION (mm) W450XD400XH530
  • This machine is an automatic spring (tension compression) tester. It enables the performance of an automatic test that measures the weight generated by the length input (length – weight) and another test (deformation, bent – weight), (weight – length), (weight – deformation, bent).
    – In addition to the automatic test for a 1-, 2-, or 3-layer load, the free field, initial tension, and peak can also be measured.
    – The unit can be changed (N, Kg, g, or Ib).
    – The measurement range is automatically changed into two stages. As such, there is no need to conduct a bothersome range change.
    – With the Up/Down button, the step can be moved. The step is moved to the desired position correctly.

This post is also available in: Korean